|
GC
Injector Overview (12 types)
|
52
|
TWELVE
INJECTOR TYPES TO CHOOSE FROM
Twelve
injector types are available for installation on SRI gas chromatographs.
Up to five injectors may be mounted simultaneously on the Model 8610C
or 8610D. The Model 410
can mount a gas sampling valve in addition
to the On-column injector which may be upgraded.
The Model 310 will accommodate a single On-column,
Heated Flash Vaporization, Heated
Split/Splitless, or PTV injector. Injector
types are selected by the user depending on the particular measurement
application, detection limit, and regulatory requirements. The On-column
injector is standard equipment on every 8610, 410, and 310 GC. Heated
Flash Vaporization, Heated Split/Splitless, and PTV injectors are all
upgrades to the On-column injector. All injectors must be installed at
the SRI factory.
 This 8610C GC is equipped with a Thermal Desorber, a Method 5030/5035 Purge & Trap, and a standard On-column injector. |
|
|
Sample
Types and Appropriate Injectors
|
|
| LIQUIDS: | On-Column, Heated Flash Vaporization, Heated Split/Splitless, PTV, Heated Static Headspace, Purge & Trap, Liquid Injection Valve, Liquid Autosamplers, or Headspace Autosampler |
| SOLIDS: | Thermal Desorber, Heated Static Headspace, PTV, Method 5035 Purge & Trap, or Headspace Autosampler |
| GASES: | On-Column, Gas Sampling Valve, Method TO-14 Air Concentrator, or Heated Static Headspace |
| SPME FIBERS: | Heated Flash Vaporization with Low Volume SPME Liner, or Heated Split/Splitless |
52